CTM -Gramophone

We needed to design a lip for the gramophone and so we took the measurements from the edge of the gramophone and created a semi-circle on the laser cutter which we then routered.

We then had to work out what angle the lip should be fixed at against the frame so that it would sit flushed.

  • The blocks with a cut angle to sit on the edge on the gramophone (3 x each frame)
  • Scrap MDF to check where the lip will sit before pinning the blocks
  • The blocks pinned on 3 times through the back of the canvas

Painted and primed lipping…

12477020_10153642325044139_1062873730_o

The group bolting the frames together – painted and with scalloped edges!

12809826_1293124537368069_967786251_o

It’s all coming together!

 

 

 

Advertisements